1]L. Chua, "Memristor-the missing circuit element," Circuit Theory, IEEE Transactions on, vol. 18, pp. 507-519, 1971.[2]J. J. Yang. (5/2014). Available:http://www.ieeeghn.org/wiki/index.php/Memristor[3]D. B. Strukov, G. S. Snider, D. R. Stewart, and R. S. Williams, "The missing memristor found," Nature, vol. 453, pp. 80-83, 2008.[4]F. Corinto, P. P. Civalleri, and L. O. Chua, "A theoretical approach to memristor devices," 2015.[5]C. Mellor. (3/2014). Available: http://www.theregister.co.uk/Print/2011/12/27/memristors_and_mouttet/
[6](2/2014). Available: http://en.wikipedia.org/wiki/Memristor[7]C. E. Merkel and D. Kudithipudi, "Towards thermal profiling in CMOS/memristor hybrid RRAM architectures," in VLSI Design (VLSID), 2012 25th International Conference on, 2012, pp. 167-172.[8]V. Mladenov and S. Kirilov, "Analysis of temperature influence on titanium-dioxide memristor characteristics at pulse mode," 2013.[9]E. DeIonno, M. D. Looper, J. V. Osborn, H. J. Barnaby, and W. M. Tong, "Radiation effects studies on thin film TiO 2 memristor devices," in Aerospace Conference, 2013 IEEE, 2013, pp. 1-8.[10]V. Erokhin and M. P. Fontana, "Electrochemically controlled polymeric device: a memristor (and more) found two years ago," arXiv preprint arXiv:0807.0333, 2008.[11]M. P. Crupi, L.; Tozer, S, "Modelling Neural Plasticity with Memristors," IEEE Canadian Review, 2012.[12]A. Chanthbouala, V. Garcia, R. O. Cherifi, K. Bouzehouane, S. Fusil, X. Moya, et al., "A ferroelectric memristor," Nature materials, vol. 11, pp. 860-864, 2012.[13]D. Kim, H. Lu, S. Ryu, C.-W. Bark, C.-B. Eom, E. Tsymbal, et al., "Ferroelectric tunnel memristor," Nano letters, vol. 12, pp. 5697-5702, 2012.[14]K. H. Choi, M. Mustafa, K. Rahman, B. K. Jeong, and Y. H. Doh, "Cost-effective fabrication of memristive devices with ZnO thin film using printed electronics technologies," Applied Physics A, vol. 106, pp. 165-170, 2012.[15]N. R. McDonald, "Al/CuxO/Cu Memristive Devices: Fabrication, Characterization, and Modeling," DTIC Document2012.[16]N. Gergel-Hackett, B. Hamadani, B. Dunlap, J. Suehle, C. Richter, C. Hacker, et al., "A flexible solution-processed memristor," Electron Device Letters, IEEE, vol. 30, pp. 706-708, 2009.[17]K. Miller, "Fabrication and modeling of thin-film anodic titania memristors," Iowa State University, 2010.[18]J. R. Ordosgoitti, "Development of a Non-Volatile Memristor Device Based on a Manganese-Doped Titanium Oxide Material," The University of Toledo, 2010.[19]J. H. Nickel, J.-P. Strachan, M. D. Pickett, C. Tom Schamp, J. Joshua Yang, J. A. Graham, et al., "Memristor structures for high scalability: Non-linear and symmetric devices utilizing fabrication friendly materials and processes," Microelectronic Engineering, 2012.[20]X. Wang, Y. Chen, H. Xi, H. Li, and D. Dimitrov, "Spintronic memristor through spin-torque-induced magnetization motion," Electron Device Letters, IEEE, vol. 30, pp. 294-297, 2009.
21]S. H. Jo, "Nanoscale memristive devices for memory and logic applications," The University of Michigan, 2010.[22]T. Chang, "Tungsten Oxide Memristive Devices for Neuromorphic Applications," The University of Michigan, 2012.[23]S. Benderli and T. Wey, "On SPICE macromodelling of TiO 2 memristors," Electronics Letters, vol. 45, pp. 377-379, 2009.[24]T. Prodromakis, B. P. Peh, C. Papavassiliou, and C. Toumazou, "A versatile memristor model with nonlinear dopant kinetics," Electron Devices, IEEE Transactions on, vol. 58, pp. 3099-3105, 2011.[25]Y. N. Joglekar and S. J. Wolf, "The elusive memristor: properties of basic electrical circuits," European Journal of Physics, vol. 30, p. 661, 2009.[26]Z. Biolek, D. Biolek, and V. Biolkova, "SPICE model of memristor with nonlinear dopant drift," Radioengineering, vol. 18, pp. 210-214, 2009.[27]S. Kvatinsky, E. G. Friedman, A. Kolodny, and U. C. Weiser, "Team: threshold adaptive memristor model," 2013.[28]J. Chowdhury, J. Das, and N. Rout, "Implementing trigonometric nonlinearity in linear ion-drift memristor model," in Industrial Instrumentation and Control (ICIC), 2015 International Conference on, 2015, pp. 1150-1153.[29]M. D. Pickett, D. B. Strukov, J. L. Borghetti, J. J. Yang, G. S. Snider, D. R. Stewart, et al., "Switching dynamics in titanium dioxide memristive devices," Journal of Applied Physics, vol. 106, pp. 074508-074508-6, 2009.[30]O. Kavehei, A. Iqbal, Y. Kim, K. Eshraghian, S. Al-Sarawi, and D. Abbott, "The fourth element: characteristics, modelling and electromagnetic theory of the memristor," Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science, vol. 466, pp. 2175-2202, 2010.[31]Á. Rák and G. Cserey, "Macromodeling of the memristor in SPICE," Computer-aided design of integrated circuits and systems, IEEETransactions on, vol. 29, pp. 632-636, 2010.[32]A. Kumar, "Memristor: The 4th Circuit Element," International Journal of Advanced Computer and Mathematical Sciences, vol. 3, pp. 176-180, 2012.[33]M. U. Bandaru, "Modelling and the Study of the Memristor," University of Dayton, 2012.[34]R. Mutlu and E. Karakulak, "Emulator circuit of Ti02 memristor with linear dopant drift made using analog multiplier," in Electrical, Electronics and Computer Engineering (ELECO), 2010 National Conference on, 2010, pp. 380-384.