bkit-text-stroke-width: 0px; "> [1] J.Gujral and M.Singh, “Performance Analysis of 4-Channel WDM System
with and without EDFA,” Int. J. Electron. Commun. Technol., vol. 4, no.
Spl- 3, pp. 70–74, Jun. 2013.
[2] J. Sudarsanan and V. Raj, “Performance Evaluation of Hybrid Amplifiers,”
Int. J. Sci. Res. Dev., vol. 2, no. 2, pp. 55–58, 2014.
[3] J. H. Rajini and S. T. Selvi, “Performance Analysis of Hybrid Optical
Amplifiers for 64×10 Gbps DWDM System,” Asian J. Appl. Sci., vol. 8,
no. 1, pp. 46–54, Jan. 2015.
[4] M. Singla, Preeti, and S. Kumar, “Comparative Analysis of EDFA based
64 channel WDM systems for different pumping techniques,” Int. J. Sci.
Eng. Researc, vol. 5, no. 6, pp. 66–69, Jun. 2014.
[5] N. Ahmed, H. A. Fadhil, S. A. Aljunid, M. S. Ali, and M. Rahman,
“Performance Analysis of WDM-PON System Based on Optimized
Remotely Pumped Erbium-Doped Fiber Amplifier (EDFA) Parameter,” J
Opt Commun, vol. 36, no. 2, pp. 103–108, April 2015.
; word-spacing: 0px; -webkit-text-size[6] C.-H. Yeh, C.-C. Lee, and S. Chi, “Optical monitoring technique based on
scanning the gain profiles of erbium-doped fiber amplifiers for WDM
networks,” Opt. Commun., vol. 241, no. 4–6, pp. 333–338, Nov. 2004.
[7] D. Birdi and M. Singh, “A Survey on EDFA Amplifier for DWDM
System,” Int. J. Advanced Res. Comput. Commun. Eng., vol. 4, no. 7, pp.
20–23, Jul. 2015.
[8] M. M. J. Martini, C. E. S. Castellani, M. J. Pontes, M. R. N. Ribeiro, and
H. J. Kalinowski, “Gain profile optimization for Raman+EDFA hybrid
amplifiers with recycled pumps for WDM systems,” J. Microw.
Optoelectron. Electromagn. Appl., vol. 9, no. 2, pp. 100–112, Dec. 2010.
[9] P. Bagga and H. Sarangl, “Simulation of 32 × 20 Gb/s WDM and DWDM
System at Different Dispersion,” Int. J. Adv Anced Res. Comput.
Commun. Eng., vol. 4, no. 3, pp. 406–408, Mar. 2015.
[10] C. Cheng and M. Xiao, “Optimization of an erbium-doped fiber amplifier
with radial effects,” Opt. Comm., vol. 254, no. 4, pp. 215–222, Oct. 2005.
[11] M. Z. Amin and K. K. Qureshi, “Er3+- Er3+ interaction effects and
performance evaluation of Erbium Doped Fiber amplifiers,” IEEE 28th
Canadian Conference on Electrical and Computer Engineering (CCECE),
pp. 1383–1386, May 2015.
[12] A. Dhokar and S. D. Deshmukh, “Overview of EDFA for the Efficient
Performance Analysis,” IOSR J. Eng., vol. 4, no. 3, pp. 1–8, Mar. 2014.
[13] S. W. Harun, K. Dimyati, K. K. Jayapalan, and H. Ahmad, “An overview
on S-band erbium-doped fiber amplifiers,” Laser Phys. Lett., vol. 4, no. 1,
pp. 10–15, Jan. 2007.
[14] B. A. Hamida, S. M. Azooz, A. A. Jasim, T. Eltaif, H. Ahmad, S. Khan,
and S. W. Harun, “Flat-gain wide-band erbium doped fiber amplifier by
combining two difference doped fibers,” J. Eur. Opt. Soc. Rapid Publ., vol.
10, no. 15015, pp. 1-5, Mar. 2015.
[15] M. M. Ismail, M. A. Othman, Z. Zakaria, M. H. Misran, M. A. M. Said, H.
A. Sulaiman, M. N. S. Zainudin, and M. A. Mutalib, “EDFA-WDM
Optical Network Design System,” Procedia Eng., vol. 53, pp. 294–302,
2013.
[16] A. Dhokar and S. D. Deshmukh, “Design and Performance analysis of
Dynamic EDFA,” IOSR J. Eng., vol. 5, no. 7, pp. 23–33, Jul. 2015.
[17] S. Singh and R. S. Kaler, “Performance optimization of EDFA – Raman
hybrid optical amplifier using genetic algorithm,” Opt. Laser Technol., vol.
68, pp. 89–95, 2015.
[18] S.R. Sharma and Tanvisood, “An overview of EDFA Gain Flattening by
Using Hybrid Amplifier,” Int. Journal of electrical & Electronics Eng, vol.
2, no. 1, pp. 156–158, 2015.
[19] R. S. Kaler, “Optimization of hybrid Raman/erbium-doped fiber amplifier
for multi terabits WDM system,” Opt. - Int. J. Light Electron Optik., vol.
124, no. 7, pp. 575–578, Apr. 2013.